Lateral-g Forums

Lateral-g Forums (https://www.lateral-g.net/forums/index.php)
-   Transmission and Rear End (https://www.lateral-g.net/forums/forumdisplay.php?f=39)
-   -   Remote bleeder.. (https://www.lateral-g.net/forums/showthread.php?t=47025)

XLexusTech 07-30-2014 09:38 AM
Remote bleeder..
 
Purchased a remote bleeder from summit which was supposed to include an adapter but the supplied adapter is wrong thread. How are guys connecting quarter master remote bleeders to f body throwout bearings?

3/8 flare to -3AN adapters? If yes part number ?

thanks in advance for any help

dontlifttoshift 07-30-2014 11:08 AM
M10 x1.5 is the thread size and pitch on the bleeder hole on a 98-02 throw out bearing.

You will have to seal it with a copper or aluminum crush washer.

:sarcasm_smiley: Can't believe summit couldn't help you with that.

XLexusTech 07-30-2014 11:28 AM
Quote:
Originally Posted by dontlifttoshift (Post 563440)
M10 x1.5 is the thread size and pitch on the bleeder hole on a 98-02 throw out bearing.

You will have to seal it with a copper or aluminum crush washer.

:sarcasm_smiley: Can't believe summit couldn't help you with that.
"Summit support: http://www.summitracing.com/parts/qtm-710105 is all you need"

dontlifttoshift 07-30-2014 01:37 PM
Yeah, I bet that fits the Quarter Master TO bearing perfectly.


All times are GMT -5. The time now is 10:20 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Copyright Lateral-g.net