Lateral-g Forums - BMR Suspension Releases New Product - Lowering Springs For 1st-Gen F-body (SP055/56)

BMR Suspension 2-inch Lowering Springs for Big- and Small-Block 1st-Gen Camaros – SP055/SP056 - $129.95

Increase cornering ability and improve cosmetic appeal of your First-Gen F-body with Lowering Springs from BMR Suspension. Manufactured from chrome silicon high-tensile spring wire, these springs are cold wound on a CNC coiling machine that can adjust the spring diameter in real time to ensure that every spring is exactly the same. These springs will drop the front end of your Small-Block or Big-Block Camaro 2-inches and feature a 620 lb/in linear spring rate to give you great handling and a smooth ride. The BMR Front Lowering Springs (SP055 Small-Block, SP056 Big-Block) lower the center of gravity to allow the body to stay flat and level in the corners, while remaining soft enough for a comfortable ride on any road. Designed for both the street performance and pro-touring crowd. And like all BMR lowering springs, they come with a LIFETIME guarantee against spring sag. Available in red powdercoat for long-lasting good looks. Installation time is about 2-3 hours. Proudly made in the U.S.A.!

To preview all of BMR’s high-performance suspension parts, please visit www.bmrsuspension.com, email [email protected], or contact them at BMR Suspension, 928 Sligh Ave, Seffner, FL 33584, 813-986-9302, Fax: 813-986-8055.

Attachment 49752