Lateral-g Forums - New Z/28 spindle

Lateral-g Forums (https://www.lateral-g.net/forums/index.php)

- Chassis and Suspension (https://www.lateral-g.net/forums/forumdisplay.php?f=38)

- - New Z/28 spindle (https://www.lateral-g.net/forums/showthread.php?t=48418)

Jr	12-09-2014 11:56 AM

New Z/28 spindle

Do you guys think suspension companies will start to design upper and lower control arms around the new Z/28 spindle?

I tried searching for more info about the spindle, but I didn't come up with much info.

Vince@Meanstreets

12-09-2014 02:21 PM

Quote:

Originally Posted by Jr (Post 584826)

For retrofit onto older vehicles?
I doubt it. There are so many choices already. Plus the Fatman/Ridetech spindle is doing so well.

MillerBuilt

12-09-2014 04:34 PM

Quote:

Originally Posted by Jr (Post 584826)

I wouldn't rule it out, and if I am not mistaken, the newest Art Morrison offering (rear IRS suspension) utilizes the New Camaro upright/bearing unit.

However I think the next most likely candidate would be the all New C7 Corvette upright/bearing unit..

Jr	12-09-2014 10:41 PM

Quote:

Originally Posted by JSM (Post 584861)

AM IRS got me thinking about newer Z28 parts. I also like that the new Z has carbon ceramic brakes.

Vince@Meanstreets

12-09-2014 10:56 PM

Quote:

Originally Posted by Jr (Post 584925)

AM IRS got me thinking about newer Z28 parts. I also like that the new Z has carbon ceramic brakes.

you know what those rotors go for right? :faint:

https://lateral-g.net/forums/showthread.php4?t=48230
these would be considered a bargin.

Jr	12-10-2014 07:13 AM

Damn.

Chassisworks

12-10-2014 10:15 AM

Quote:

Originally Posted by Jr (Post 584925)

I also like that the new Z has carbon ceramic brakes.

If it's anything like the ZR-1 parts you'll need a VIN number to get them. And they'll check it.

All times are GMT -7. The time now is 09:21 AM.