Stielow Garage Sale Part 1
 

Item Location (City/State): Milford MI

Price: Cheap to Expensive :G-Dub:

Description:

Photos are from when parts were new...

Not sure what the used market is like for old Pro-Touring parts. All the parts were working well when removed. I'm just tring to clear out some space, pass some good parts to Lat-G member and get some money to buy more parts.

Art Morrison Front Clip
SKF wheel bearings
C-6 Corvette upper and lower control arms
Splined Sway Bar
Set up for OE style LS Corvette engine mounts
With rack with higher effort T-bar
Strange Shocks
Built in trans cross member
No brakes
$3200

https://lateral-g.net/jackass/DSC01511.jpg

Kooks 304 stainless 1/78” headers with SPD CNCed exhaust flanges to 3 inch V-band clamp. Fits Art Morrison or DSE front sub frame. Nice all tig welded headers. Not off the shelf Kooks custom welded to be tight to floor pan.
$ 600

https://lateral-g.net/jackass/DSC_2243.jpg
https://lateral-g.net/jackass/DSC_2246.jpg L92 Truck exhaust gaskets.

Detroit Speed Dash inset with Stewart Warner Gauges
$500

https://lateral-g.net/jackass/DSC_2224.jpg

D&D T-56 Transmission Viper box with the following gear ratios.
2.66/1.78/1.30/1.00/.80/.62
26T Input Shaft set up for LS
31T Output Shaft Viper
Bronze Shift Forks
Includes B&M Viper Shifter
13000 miles
$ 2200

D&D T-56 Transmission F-car box with the following gear ratios.
2.66/1.78/1.30/1.00/.80/.62
26T Input Shaft set up for LS
31T Output Shaft Viper
Bronze Shift Forks
OE Shifter
NEW NEVER USED
$2700

Set of Brembo brakes off Red Devil – Red
6 piston front 380 mm 4 piston rear 360 mm
2 sets of front rotors one for street and one for track
2 set pads one for street and one for track (All ½ worn)
Fits Art Morrison sub frame, DSE and C-6 Corvette
$4000

http://i439.photobucket.com/albums/q...5/DSC_2849.jpg

http://i439.photobucket.com/albums/q...5/DSC_2863.jpg

Pair like new Recaro hard shell race seat Large just used OUSCI 2012 in Mayhem
$1000

See photo below

I know I'm going to get a bunch of questions so e-mail me at ([email protected]) or post it here for a general question. I can ship some things but the big stuff will be a pain and UPS has upped its rates a bunch. This weekend I'll try to get some more photos.

Thanks

Mark

Message sent on the dash.

PM sent on Headers

PM sent on the dash

Mark,
I can't send a private message as it says it is full, interested in the LS radiator.

Scott

I will take the headers if Jay does not and you are willing to ship.

Couldn't send a PM either.

Thanks,
Don

Mark let me know how much for the radiator& fans and the dash if it doesn't go.
Thanks
Wayne

Message sent.

Thanks

Parts
 

So many nice parts at great prices and as usual I'm too late.
I will never finish project Devil Dog. :hairpullout:

Email sent on the seats

Thanks Mark.