FS: T56 trans tunnel cap, ss steering joint, C5 rear calipers
 

Item Location (City/State): Pensacola, FL

Price: $50 & up

Description: NEW

1) Speed tech T56 trans tunnel cap. SOLD

2) Flaming River stainless steering U joint SOLD

3) Corvette C5 rear calipers. SOLD

Scott

I will take the flamming river ujoint.. please send PM paypal info

paypal sent :)

T-56 Tunnel cap
 

Interested in tunnel cap, is this for a first generation F-body ? Our car is a 69 Firebird convertible and have intentions on installing a LS-1 GTO engine and have the shifter in the factory location w/ a T-56 six speed. Correct cap ? Please advise when you get a free moment. Thank You.

Tim john---

Hi Tim. Yes its for a first gen. Its designed for the speedtech engine mouts & crossmember. It may fit other setups, but it depends on engine placement. I am running a DSE subframe & setback engine mounts. This cap wasnt quite long enough. I can take some measurements if you'd like.
Scott

Good morning Scott, I am new to the PT objective so I am gathering parts/components so I really do not know what I will end up with for a cross member, engine mounts, etc… I was leaning towards Holley mounts and to place the engine so as the shifter on the T-56 will end up in the same position as the original Muncie so I can use the original floor console and look factory stock on the inside. Let me do a little more homework to see if that Speed Tech cover will work for my application and report back to you, if you can afford me the time to do so. Thank you.

Tim john---

PM sent on the Tunnel Cover

Payment sent via Paypal!

Awesome deal thanks, but don't forget to ship that T56 mag with it for the $100 ;) :getout:

Would like to pursue purchase on tunnel if still available Scott. Thank You.

Tim john---

Apparently first come is not necessairly first served. Thanks anyhow.

Tim john---