Lateral-g Forums - My 1968 Camaro

Page 1 of 9

Last »

Show 40 post(s) from this thread on one page

Lateral-g Forums (https://www.lateral-g.net/forums/index.php)

- Open Discussion (https://www.lateral-g.net/forums/forumdisplay.php?f=14)

- - My 1968 Camaro - builder? (https://www.lateral-g.net/forums/showthread.php?t=48883)

pimlico

01-19-2015 10:11 PM

My 1968 Camaro - builder?

....

Mr.VENGEANCE

01-20-2015 01:57 AM

Quote:

Originally Posted by pimlico (Post 590647)

Hi all,

Does anyone know approximately how much these builds cost and what's the breakdown of materials and labor?

heres the breakdown..

http://i1.kym-cdn.com/photos/images/...35/207/d2b.jpg

Build-It-Break-it

01-20-2015 02:16 AM

I would imagine about 6 digits $$ parts and labor for builds of that level. The crazier you get the more you pay obviously. Most places charge $85hr shop rate. Just an example: Mini tubs will cost you $350 for parts but 40hrs of shop labor ($3400) to put them in. Last I heard that's the amount of hours they charge for that particular job. Do the math, it'll add up fast.

Sheck44

01-20-2015 03:25 AM

LOL .. thats too funny !!
Your looking at $100K just in parts ... but the killer is $85/hr for labour whether it be for body & paint, and the rest if your not so mechanically inclined. Some of the builds you have mentioned have 1000+ hours into them, the math is simple and it adds up FAST ...

Bryan O

01-20-2015 05:54 AM

Quote:

Originally Posted by Sheck44 (Post 590658)

... but the killer is $85/hr for labour...

I know of a couple of excellent shops in the Phoenix area at $50/hr.

DOOM	01-20-2015 06:22 AM

To get that caliber of build you will easly be over $150.000.00! Ask me how I know.:y0!:

Musclerodz

01-20-2015 07:00 AM

$150k to $300k

Vegas69

01-20-2015 07:45 AM

Run for your life, forget what you have seen. :unibrow:

Che70velle

01-20-2015 10:07 AM

Quote:

Originally Posted by Vegas69 (Post 590694)

Run for your life, forget what you have seen. :unibrow:

^^^^^^^^^^^^^^^
You will thank him later.

Flash68

01-20-2015 11:33 AM

Quote:

Originally Posted by pimlico (Post 590647)

Hi all,

I'm looking at restoring my 1968 Camaro. I love the style of some of these pro-touring builds such as Blu Balz and Frostbite although it's a Firebird. Another good one is Badmotorfinger v2.2. Also a big fan of Lou's Change.

Does anyone know approximately how much these builds cost and what's the breakdown of materials and labor?

Any recommendations on a fabricator?

Why on earth would you like that one? :lol:

Quote:

Originally Posted by Vegas69 (Post 590694)

Run for your life, forget what you have seen. :unibrow:

Yes! Yes! :theresa:

All times are GMT -7. The time now is 08:55 PM.

Page 1 of 9

Last »

Show 40 post(s) from this thread on one page