|
Wilwood 1-1/8" Master with Prop Valve
2 Attachment(s)
Item Location (City/State):huntington beach
Price: SOLD Description: Brand new just used for mock up, 1-1/8" bore. Never had any fluid through it. Went with a Baer Remaster. Raw finish Still on car until it comes back from interior hopefully a week or two before it can ship. |
What is the bore?
Don |
1 1/8
|
PM sent.
|
Jay im curious if this setup would work with my 4 piston forged dynalite front brakes, im running manual brakes with discs on all four courner and the master i have isnt cuttin it, any help would be appreciated
|
You are better using 7/8 Bore for Manual Brakes
|
Hydro boost and Wilwood 6 piston front 4 piston rear on a 69 Camaro. Would this set up work ?
|
I was planning on running 6 piston and 4 piston so I guess so. Just need to find out about hydra boost. I was running a booster
|
who wants it
|
I'll take the proportioning valve if you're willing to separate :thumbsup:
|
| All times are GMT -7. The time now is 02:26 PM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2026, vBulletin Solutions Inc.
Copyright Lateral-g.net