LS1 Ram Air Intake Manifold
 

Anyone out there have any experience with Scott Pro Speed Parts (hitechmotorsport/Ebay)? I've attached a picture of their product listing. I have a 69 Camaro with a 2000 Trans Am LS1/6 speed and want to switch out the factory composite manifold. It's basically stock now except for headers and FAST 92mm billet throttle body. I plan on installing a Comp Cams Thumper cam with upgraded valve springs and push rods shortly and want to change the factory intake while I perform the cam change.

My car is basically a "cruiser" now (Picture attached)....but I want the old sound of a lumpy cam and the "hi tech" look of the sheet metal intake manifold plus some power increase! I would appreciate your input on this manifold as the pricing is very reasonable. I have to confirm it will fit under my factory cowl hood before I go much farther!

Chuck
Charlotte, NC

Hi have no experience with Scott at Hitech but you have to watch the Ebay overseas stuff being sold as the real deal but to be safe buy from the man.

http://www.precision-metalcraft.com/