How to bleed slave cylinder?
 

Guys,
I have a clutch slave cylinder that I need to bleed. It has no bleed screw, and the line is attached via a roll pin that retains the fitting, so I can't crack it to bleed. The fitting swivels in the end of the cylinder.

http://i1113.photobucket.com/albums/...6/IMG_1729.jpg

http://i1113.photobucket.com/albums/...6/IMG_1731.jpg

It seems to be an OEM setup for an early 90's camaro, at least that's what it is listed as on E-Bay. It appears to be a "sealed" system...i.e. it comes assembled, ready to use, master/ hose/ slave. But it has a reservoir, so it seems like I should be able to refresh the fluid/ bleed it.

Are you familiar with this setup? How the heck do you bleed it?

Thanks for your help!!

Bill

Lots of info here:

https://www.google.com/webhp?sourcei...+camaro+clutch

-Dale

Thanks Dale! Completely answered my questions.

Sorry for the delay in responding, I thought I had.