Lateral-g Forums

Lateral-g Forums (https://www.lateral-g.net/forums/index.php)
-   Project Updates (https://www.lateral-g.net/forums/forumdisplay.php?f=16)
-   -   69 RS/SS Build (https://www.lateral-g.net/forums/showthread.php?t=49871)

DKz Garage 04-13-2015 03:54 PM

69 RS/SS Build
 
1 Attachment(s)
Thought I would start a thread on my 69 Camaro build that started a couple of years back..... I get a lot of inspiration /ideas from the members. Here is a pic of the car as it was the day I purchased it. California RS/SS small block (originally) w/air. Lemans blue with black standard interior. Very clean car, and a great starting point for the build.... Plans are an LS motor with manual trans along with the usual upgrades. Let the journey begin!

DOOM 04-13-2015 04:24 PM

Nice! Now keep the updates coming!!

tkkleinjr 04-13-2015 04:26 PM

Good start!!!!!!!!!

tubbed69 04-13-2015 04:49 PM

Glad you started a thread,keep updates coming.

WSSix 04-13-2015 07:41 PM

Please tell me the green one is your avatar is the car now? That's a great looking green. Welcome to the site!

waynieZ 04-13-2015 10:33 PM

Welcome Nice project.

Justin@EntropyRad 04-14-2015 09:35 AM

Nice start
 
Everything comes from somewhere

DKz Garage 04-14-2015 09:55 AM

Quote:

Originally Posted by WSSix (Post 602147)
Please tell me the green one is your avatar is the car now? That's a great looking green. Welcome to the site!

Yes.... the Avatar is my car as it is now. A lot of guys give you that "look" when you telling them you are painting your car green??

DKz Garage 04-14-2015 10:06 AM

3 Attachment(s)
Couple of more shots of the car as it was being taken apart. The previous owner had put in a 454 with a turbo 400 trans. He was a writer with one of the car magazines and did a write up on the motor "Budget build 454". He put the motor in the 69 and ran the hell out of it. The motor was strong and ran great, but I really had the itch to do an LS drivetrain.

DKz Garage 04-15-2015 09:02 AM

4 Attachment(s)
Got started by cleaning up the firewall a bit and closing up some of the unneeded openings in the sheet metal. I will be welding in a DSE firewall panel to get things smoothed out.


All times are GMT -7. The time now is 05:15 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2026, vBulletin Solutions Inc.
Copyright Lateral-g.net