Entropy Radiators now available from MCB!
 

We have just agreed to sign up with Entropy as the demand for their product has been high and the reviews on quality/fitment have been great. We have done a lot of research on the product and we are confident these units will do a great job at a great price too!

We have some special pricing to offer you as well! Most Kits with Dual Fans are under $800!!

They make Rad's for MANY applications such as:
AMC, Buick, Chevy, Ford, Jeep, Mopar, and Pontiac!

They will also build customs.

LIFETIME WARRANTY!!!

Standard units use 1" tube and there is an option to upgrade to 1.25" tubes.

All units are fully welded, no epoxy.

LSX swap units are one of the most popular today. They offer both early and late style units (driver or pass side upper ports) and include the correct Steam Vent Port.

They come in a natural aluminum finish, but can be polished or powder coated.

They include an aluminum shroud and Dual fans as well.

Billet Filler neck and Stainless hardware

We strongly recommend their Fan controller which allows you to adjust the temp the fans come on at (160-215 Deg), allows you to run them at half speed start for a more gentle draw on your alternator, has an AC command input, and will work with your LS - PCM fan trigger or as a complete stand alone system as well!

Please Call, PM or Email with your application for a quote.

Thanks
MCB

First Gen F-Body unit:
http://www.entropyrad.com/images/sou...body_A4_PS.jpg

Polished Billet Caps:
http://www.entropyrad.com/images/cac...t16PSI.220.png

LSX series Fan Control Module with wiring harness:
http://www.entropyrad.com/images/cac..._small.180.jpg

PM sent. About time to upgrade my cooling.


Jeff-

PM replied.
Thanks
Matt

hopefully someone that has one, or knows better then me will chime in. Going to order one. But, I've done away with all the wiring from the ls harness that i Wasn't using.. (the fan stuff)

Is there a controller that I can buy and wire in some how for on and off for temps? I have no idea what wire it is, and I'd have to pay tuner to set up.. etc...

The controller offered by Entropy will run the fans 100% independent of the LS or any computer. It can be triggered by its own sensor and programmed for on/off temps and can start the fans at half speed so the alternator doesn't take such a hard hit every time they spin up. It also has an AC input trigger you can run from a Trinary switch or any trigger you choose. It can be mounted in the car or under the hood, the wire length included is quite long.

They use 10GA wire and dual 40A fuses too.

OE non corrosive sensor. A bung for it can be installed at no extra cost or you can run it in the head.

160-215 turn on range

Take a look at it in entropys site under harness kits

Matt

thanks Matt.. I'll get back with you in a few weeks after vacation to get it ordered.:thankyou:

Ok, sounds good. Enjoy your vacay!

Thanks
Matt

Those look awesome! And the price is more than reasonable. Are they manufactured stateside?

Thanks.

I've had an Entropy in my daily driver Jeep for about a year now. Works great. I would highly recommend them.

Yes, they are made here in the US.

Let me know if you need a price, we are also now offering PRC radiator packages as well.

Thanks
Matt