Wire Cover or Sleeve
 

Wire cover or looms or sleeves not sure what you call it.

Where can I get this stuff, Who makes it? Are other color combinations availiable?

I haven't seen that exact stuff before.. but WireCare.com has a lot of sleeve products, most are made by TechFlex

-Dale

I plan to use Techflex when I get around to wiring. If you look for Furry Letters store on ebay the guy sells just about every size/color by the foot.

I got some from here, but I have seen the exact one your showing, somewhere on line.
http://www.ebay.com/sch/furryletters...p2047675.l2562

Waytek has you covered if you want black
http://www.waytekwire.com/products/1...g/&pageSize=36

They also have heat shrink cable sleeves in black as well
http://www.waytekwire.com/products/1...bric-Sleeving/

Whats that paint on that block and trans?

Is it wire inside a hose?

It does look like AN hose more than anything. Could very well be I suppose....

-Dale

It IS hose. The OP picture is from the Angelo Vespi/ DSE Camaro. I had some of the same hose on my car (DSE worked on my car too). I shortened a piece of it...it is cloth braiding over a lightly convoluted inner plastic liner. Just cuts with a sharp scissor. In my case it has A/N style 2 piece fittings. It is easy to work with...much more than SS braided hose.
I like it with the shrink tube for cable cover. Slick...
This is a pic of the hose used for my fuel tank breather.

http://i1113.photobucket.com/albums/...DSCN4525_1.jpg

Summit has it with a blue or red tracer. Not sure where to get it with the gold tracer. I wonder if DSE would divulge?

I hope that helps.


Bill

69hugger that hose in your pic is goodridge ptfe hose 910 i think.

96z28ss i think dse just pulled some of the covering from the goodridge hose to cover the wires to make it all match.

I use techflex for covering my harness and it looks good. dont think i would want it that close to my exhaust as it might melt. wirecare and amazon are good places to get tech flex from.