Lateral-g Forums - BMR Suspension Releases New Product - 1.5" Drop G-Body Lowering Springs

BMR Suspension 1.5-inch Lowering Springs for 1978-1987 GM G-Body – SP035

Improve the cosmetic appeal and increase the handling capabilities of your 1978-1987 GM G-body with 1.5-inch Lowering Springs from BMR Suspension. Manufactured from chrome silicon high-tensile spring wire, these springs are cold wound on a CNC coiling machine that can adjust the spring diameter in real time to ensure that every spring is exactly the same. These springs will lower your G-body 1.5-inch and feature a fine-tuned spring rate to give you a smooth ride and great looks. The BMR Lowering Springs (SP035) lower the center of gravity to allow the body to stay flat and level in the turns, while remaining soft enough for a comfortable ride on any road. BMR designed the SP035 springs for street performance, but it also works well for the occasional track outing. Like all BMR lowering springs, the SP035 has a LIFETIME guarantee against spring sag. Front and rear springs are available separately (SP036 Front, SP037 Rear). Available in red powdercoat for long-lasting good looks. Installation time is about 2-3 hours. Proudly made in the U.S.A.!

To preview all of BMR’s high-performance suspension parts, please visit www.bmrsuspension.com, email [email protected], or contact them at BMR Suspension, 928 Sligh Ave, Seffner, FL 33584, 813-986-9302, Fax: 813-986-8055.

http://i1309.photobucket.com/albums/...psbj4b8nya.jpg