66 Mustang - Techstang
 

Hi Everyone. This has been a 5 year build. Going to post a quickie build thread as requested :).

This is what I started with.

https://photos.smugmug.com/photos/i-...QBM98vg-XL.jpg

Stripped it down with straightforward plans to put a 4.6 in and some suspension mods

When I started the build I only had two kids. Now I have 4!

Project creep went into a full sprint as I got an AME Chassis and suspension goodies

https://photos.smugmug.com/photos/i-...wDnDmpk-XL.jpg

https://photos.smugmug.com/photos/i-...jHzJPTr-X3.jpg

https://photos.smugmug.com/photos/i-...VpCzLqZ-XL.jpg

https://photos.smugmug.com/photos/i-...5bB5BRG-XL.jpg

On the welding table. Fitting the Coyote engine and building the floor, body mounts, etc

https://photos.smugmug.com/photos/i-...9MVdCBV-XL.jpg


https://photos.smugmug.com/photos/i-...2hzT4Kr-XL.jpg

Flushed the glass

http://cdn-3-service.phanfare.com/im...2966d6c801c1_1

http://cdn-3-service.phanfare.com/im...557652f25a76_1

http://cdn-3-service.phanfare.com/im...36fa942c781d_1

Custom Headers

http://cdn-3-service.phanfare.com/im...7653fc0c1b07_1

http://cdn-3-service.phanfare.com/im...6cbc12d2a1ae_1

http://cdn-3-service.phanfare.com/im...6cbc12d2a1ae_1

http://cdn-3-service.phanfare.com/im...7fd5f4d906df_1

I'm in the south. Gotta have AC!

http://cdn-3-service.phanfare.com/im...e068e76523bd_1

Figuring out the tailpipes

http://cdn-3-service.phanfare.com/im...f86772365f35_1

Flushing the rear and mounting LED tail lights

http://cdn-3-service.phanfare.com/im...6c483ff865f4_1

http://cdn-3-service.phanfare.com/im...7e88e88fad39_1

http://cdn-3-service.phanfare.com/im...a5a7dfba1981_1

Built the grille

http://cdn-3-service.phanfare.com/im...a329852984ca_1

Custom tank

http://cdn-3-service.phanfare.com/im...d3c0fbe4682d_1

http://cdn-3-service.phanfare.com/im...90005e6f936f_1

http://cdn-3-service.phanfare.com/im...b2134fd8043d_1

http://cdn-3-service.phanfare.com/im...4510ff3654ea_1

http://cdn-3-service.phanfare.com/im...6c58bf320c12_1

http://cdn-3-service.phanfare.com/im...9e5fdc98609a_1

http://cdn-3-service.phanfare.com/im...47b0c5e8f406_1

http://cdn-3-service.phanfare.com/im...f578692ab025_1

http://cdn-3-service.phanfare.com/im...80128e29a1cc_1

http://cdn-3-service.phanfare.com/im...c0383f9225f6_1

http://cdn-3-service.phanfare.com/im...c5f7397e3534_1

http://cdn-3-service.phanfare.com/im...c60a5c2e4ba7_1

http://cdn-3-service.phanfare.com/im...5d5edc5ae997_1

http://cdn-3-service.phanfare.com/im...0d332b261e25_1

Big Bertha

http://cdn-3-service.phanfare.com/im...1f82a3de22be_1

Need more power. If only I had known how many headaches this had in store for me...............

http://cdn-3-service.phanfare.com/im...69a9b564ff37_1

http://cdn-3-service.phanfare.com/im...8e7ef894ebda_1

Finishing the smoothing

http://cdn-3-service.phanfare.com/im...5fa54102f63f_1

Through the deck lid gas fill

http://cdn-3-service.phanfare.com/im...46a50ce5515c_1

http://cdn-3-service.phanfare.com/im...cffd9a9b19bc_1

http://cdn-3-service.phanfare.com/im...ab3fd3ef314e_1

Let's just cut the hood to fit around the supercharger

http://cdn-3-service.phanfare.com/im...57290f292783_1

http://cdn-3-service.phanfare.com/im...e432d1cfe567_1

http://cdn-3-service.phanfare.com/im...b11ed978dc15_1

http://cdn-3-service.phanfare.com/im...a65b192d02ae_1

Body back off to head to paint prison

http://cdn-3-service.phanfare.com/im...c9e20866a53d_1

Patiently waiting for the rest....In the mean time, what's going on at the back of the car in the picture? I see the bumpers been molded into the body, is the trunk extended and the taillight panel recessed?

It was an unexpected by product. Once the bumper and all was welded and molded in, the tail light pan appears recessed but I think we actually left it in the factory position. We added some metal to the trunk lid lip. I'd honestly have to have it next to a factory one to point out all the differences. Would make for a good "Hocus Pocus" in the newspaper, if you remember that strip. Lol