|
MillerBuilt's WELD-ON C6/7 Hybrid Floater System
Full Floater System -
These NEW billet steel Adaptors Weld-On to nearly any axle tube! Advantages:
Fitment: Any rear-end with 2.750”-3.250” o.d. axle tubes See information listed below for both the "long" and "short" versions... Weld-On “Short" Floater Kit (pictured below) E-brake Assemblies & E-brake Cable Brackets NOW INCLUDED With Each Floater Kit http://i35.photobucket.com/albums/d1...psnktb03em.jpg Full Floater Kit (Short) Includes: • (2) Billet Steel Short Floater Adaptors • (2) Billet Aluminum Caliper Brackets • (2) SKF 33 Spline Hub Assemblies • (2) E-brake Assemblies • (2) E-brake Cable Brackets • (1) Install Kit • (2) Billet Aluminum Hub Cap Seals ________________________________________ PRICING AT - https://millerbuiltusa.com/universal-weld-on-base-kit/ Full Floater Kit (Long) Includes: • (2) Billet Steel Long Floater Adaptors • (2) Billet Aluminum Caliper Brackets • (2) SKF 33 Spline Hub Assemblies • (2) E-brake Assemblies • (2) E-brake Cable Brackets • (1) Install Kit • (2) Billet Aluminum Hub Cap Seals ________________________________________ PRICING AT - https://millerbuiltusa.com/universal-weld-on-base-kit/ Have interest? Have questions? Need more info? Distributor Inquires Welcome! To help determine which kit might work best for your particular application, please see below picture. http://i35.photobucket.com/albums/d1...psi1qfyc6n.jpg "Weld-On" kit in action! Questions welcomed! |
FREE Shipping & PayPal This Weekend!!
FREE Shipping & PayPal This Weekend!! (8/6/16 & 8/7/16 - "lower 48" states only)
|
Quote:
http://i35.photobucket.com/albums/d1...psainamkh2.jpg Gets you to this..... (complete hybrid full floater system) http://i35.photobucket.com/albums/d1...psh2bmigjf.jpg http://i35.photobucket.com/albums/d1...pse5lmj6be.jpg http://i35.photobucket.com/albums/d1...ps1onf1adn.jpg Housings can be supplied as well for a complete solution...... Thanks for looking! |
In Stock
In Stock
|
Customer Ride
Recently received a few orders from Donny over at Frame Up Wheel Works. Donny/Frame Up is out of Beach Park, IL. Donny's builds speak for themselves and I am thrilled to have him on board with the MillerBuilt Full Floaters!
Donny is well versed in what it takes to properly fixture the MillerBuilt Weld-On Full Floater. Donny felt the MillerBuilt Hybrid Full Floater System was the best solution for what he was looking to accomplish. Per Donny,,,,, mission accomplished! Below is the beautiful 69' that one of the MillerBuilt kits sits under. The car frequents both Auto-X and Open Track Days.... http://i35.photobucket.com/albums/d1...ps1udkxyn1.jpg |
Thanks Jay!!
Here is another that we did. https://lh3.googleusercontent.com/Lj...=w1425-h950-no Using the long snout weld on kit, I was able to widen the rear end so that I could run a square wheel and tire setup helping our consumables last longer. |
Ridetech Chose MillerBuilt for its Full Floater Needs!
MillerBuilt is very proud to be a part of the new Ridetech Track 1 Camaro build!
Follow along as this beast comes to life... http://www.ridetech.com/info/categor...project-build/ |
Get Yours
In Stock!
|
Theres a thirst for more info on these kits. They now come as bolt on which is very nice. Do you offer axles? Is there an inner axle seal with the kit? Will the ear spacing on the caliper bracket fit aftermarket brakes like Baer 6P and SS4?
|
2 Attachment(s)
I bought Jay’s weld on kit. Very quality kit and his customer service is great. Every time I called with a question, he either answered the phone or called me back with great tech support too. I highly recommend his parts. Yes, he supplied me with axles as well. His kit comes with everything you need and I told him what brakes I'd be running also. I'm running Baer 6S Extreme kit on the rear.
|
| All times are GMT -7. The time now is 04:57 PM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Copyright Lateral-g.net