Anyone make this hood?
 

My 73 has the stock flat hood and I plan to put a cowl hood on, but I'm not a fan of the flat lift up style. With how many curves the body has, it looks out of place to me.
This is the normal cowl
http://i41.photobucket.com/albums/e2...psv6jvbvi5.jpg
I found this one on a pro touring 73 Camaro and it reminds me of the VFN Sunoco hood for the 4th gen Camaro. To me it looks cleaner and smoother.
http://i41.photobucket.com/albums/e2...psf6g0e2s9.jpg
Does anyone know of someone who can produce that hood other than a body shop?

goodmark steel 2 "
anvil auto carbon fiber "power bulge" 2.5"

the orange camaro was a k&n filters car ...owned by some guy named brian do some homework you will find out where the hood came from

correction it was not a k&n car ....had big wilwood stickers on it when it was at sema 2012-2013 was in the optima ultimate street car challenge

Have you contacted any of the Fiberglass hood companies? Such as Glastek,Harwood,VFN. It looks like a 2'cowl hood without the center ridge being so pronounced. And some times they will custom make hoods for an additional charge.http://s1064.photobucket.com

I called a VFN this morning and I was told they are working on a Sunoco style hood for the 70-81 similar to the one they just released for the 67-69 camaro

Brian Hobaugh's Camaro. Page 28 of his build thread.

https://lateral-g.net/forums/show...=23997&page=28

yep, they did some work to remove the hood line.

Now I recall I have seen such a hood on the IMSA /SCCA Camaro Road race cars back in the day,In fact if you look it up you will see this hood on the Shafer Farms Racing IMSA Camel GT AAGT Camaro Race Car.http://s1064.photoworks.com

guess that solves that ....theres your car owner and the modification done to it ...post some pics when you gets your done and on

http://i1170.photobucket.com/albums/...omemisc086.jpg

Mine was takin off of a 70-72 cowl from a Chevelle (not by me, innocent but loving the sacrifice) and welded onto my stock hood, my body guy said it wasn't too hard...