Lateral-g Forums - What to use for 1" HX cooler lines

Lateral-g Forums (https://www.lateral-g.net/forums/index.php)

- EFI and Forced Induction (https://www.lateral-g.net/forums/forumdisplay.php?f=47)

- - What to use for 1" HX cooler lines (https://www.lateral-g.net/forums/showthread.php?t=52906)

waynieZ

05-09-2016 12:17 PM

What to use for 1" HX cooler lines

I'm using a Lingenfelter Stewart EMP pump and I was wondering what everyone is using for 1" hose for their HX cooling lines? Any Ideas where to get it and alumium 90 degree bends, reasonably priced ?

Thanks

tigwerks

06-07-2016 02:44 PM

I would use woolf aircraft aluminum mandrel bends

waynieZ

06-07-2016 04:29 PM

Quote:

Originally Posted by tigwerks (Post 638817)

I would use woolf aircraft aluminum mandrel bends

tigworks I was just coming on the update my build thread, That's exactly what I used! Beautiful bends with tight radius to keep it tucked up tight.
Thanks for posting I appreciate it.

tigwerks

06-08-2016 07:40 AM

ya, they seem to have the best pricing and bend quality. Also they have a wide selection available.

All times are GMT -7. The time now is 04:09 PM.