Bending stock fuel rail?
 

Am I crazy to think this line could be bent 90 AN be much neater?
Anyone ever do that or see it done?

They now make fuel rail adapter like you have with a built in 90 degree. It eliminates the fitting coming so far out the side. Also flipping the fuel rail will also set it closer back to the firewall. You can bend the fuel rail some but I would flip it first.

Hard to see but rail is already flipped... so far the only 90 degree fitting I found were "low flow" hard 90 eBay items but I am still looking

http://www.russellperformance.com/mc.../sb/611223.jpg

Is this what you are looking for?

Here is the page
http://www.russellperformance.com/mc...injected.shtml

Thanks looks promising have to see if it fits a GM rail it's visibly different from the others also need to see if it works with ptfe.... nice find thank you!

Edit Ordered

thats the fitting i was talking about. plus you dont have that stupid plastic fitting which could lead to a fire issue. Plenty of documented issues

Anyone know if this will work with Ptfe hose? I suspect not :G-Dub:

Very doubtful. You need fittings specific to the hose.

Don

Thanks don Russell who is owned by Edlebrock has the cruddy info on there site searching for the part number in the instructions section goes nowhere

I think this might be what I need Russell 632063 Black ProClassic Hose

But I have 6 foot of Summit Racing® Braided Nylon Hose SUM-240606B

Think that might work?

Sorry no idea. Russell rubber hose sucks for fuel. I used it and it degraded quickly.

Don