push button switches for exhaust cut outs?
 

I wanted to find a better looking switch that could control my QTP cutouts, but I'm having a hard time finding anything beyond a basic toggle switch. I've seen KindigIt install a push button that lights up when the cutouts are open, but haven't been able to find something similar. My understanding is I should search for a "reversing polarity momentary switch", but haven't seen anything similar. My goal would be to find a button that when pressed and held down would open the cutouts and light up, and when I press and hold down again would close them and turn off the light on the switch.

Would love to see what others have done...

thanks!
-Adam

I use this on my e-fans. Get the pigtail too.
https://www.amazon.com/gp/product/B0...?ie=UTF8&psc=1

Thank you!, that's exactly the look I'm trying to find, but unfortunately the design wouldn't allow me to close the cutouts by reversing the polarity... your link did let me go down the rabbit hole within Amazon and find other switches that would work, but not as slick looking:
https://www.amazon.com/Rocker-Switch...C1XVCWKM7NPP9V