Best place / price for new Delphi 600 series 12.7:1 ratio steering box
 

I am looking for the best place/ price for a new Delphi 600 series steering box in 12.7:1 (bare finish is fine, black is better) for a 69' Camaro
I will also need the 3/4 - 30 spline rag joint and p/s hose fitting adapter kit (O-Ring To Inverted Flare Adapter Kit)

shipped to Las Vegas, NV 89131

It has been awhile since I bought one (it was a new Lee Mfg. box from Tyler @ ATS)

Please let me know where you guys have been going , figured that I would try our vendors here before online search

Thanks in advance,
Jeff
(702)677-4085

I have used a couple from Turn-One. Very nice but the cost is high due to a shortage of castings. Ridetech and DSE sell the Turn-One box as far as I know.

Don

Thanks Don!

I have a Turn One as well. They are about 10 miles from my home. If you are in need of a 3/4-30 rag joint I have a brand new, never used DSE one available. $ 75.00 plus shipping. PM me if you are interested.

Tim john---

For some reason, the un-plated box is cheaper from DSE than it is from TurnOne. DSE lists their steering ratio @ 12.7, while TurnOne lists a 12.1 ratio.

Lee is also back in business if you want a Lee box. http://www.steertechgrp.com/

You will need a new rag joint. I'm not clear if there are any differences or not, but the CP rag joint (CLP-RJC730R) is $50 cheaper than the DSE (090205)version. I'm sourcing these prices from Summit Racing.

we can do a SWEET ALL NEW Delphi box what ever ratio you want they are not cheap 899.00 is the cost and these are ALL NEW PARTS i "THINK" most others are using old box cores.
that being said
Sweet even says they are WAY over kill for a street car. these are the boxes that they supply to NASCAR.
they have a re manufactured 700 box that is of GREAT quality for 499.00
let me know if we can help

Hotchkis has all-new boxes with rag joints for $599.

Thanks Jon!
But I think that Hotchkis no longer carries them, the page is gone from their website

Thanks, Jeff

Got one!

Thanks everyone for the input

Jeff

Where did you get it and how much did you pay?? Did it include rag joint and adapters?? I am also in the market for one.

Thanks,
David