Lateral-g Forums - Cleaning up stainless works headers

Lateral-g Forums (https://www.lateral-g.net/forums/index.php)

- Open Discussion (https://www.lateral-g.net/forums/forumdisplay.php?f=14)

- - Cleaning up stainless works headers (https://www.lateral-g.net/forums/showthread.php?t=54872)

XLexusTech

04-30-2017 06:21 PM

Cleaning up stainless works headers

Anyone have a recommendation for cleaning these up ? New never started but they could use some cleanup and polish

randy

04-30-2017 07:41 PM

Quote:

Originally Posted by XLexusTech (Post 658127)

Anyone have a recommendation for cleaning these up ? New never started but they could use some cleanup and polish

Clean all the oil off of them and once you run them and they heat it they will produce a nice color.

Che70velle

05-02-2017 07:45 PM

0000 steel wool. I polish all of my stainless and chrome with it. Also cleans glass!

TheJDMan

05-05-2017 05:12 PM

I second the 0000 steel wool but I would wait to clean them until you have them installed and are finished handling them. Then clean them off before you start the engine for the first time. Or clean them now and install them then clean them again before starting. Just make sure you have removed all finger prints before starting the engine because they are a bitch to remove once they are burned on.

All times are GMT -7. The time now is 09:15 AM.