1st gen Camaro ECU mounted under dash
 

Hi Has anyone got pictures of their ECU mounted replacing the glove box or anywhere under the dash for a first gen Camaro?

Thanks in advanced.
Wayne

I used to mount them above the glove box, even with vintage air. I am not sure if I have a pic though. I'll have to look. I now go thru the trans tunnel just inside the firewall on pass side. The newer, smaller ecms fit well on top of the trans tunnel between the evaporator and the firewall. I do have pics of that on a first gen f body.

We just started looking for a good place to put it and I know a lot of guys put it above the glove box or right where the GB door is. Both seem pretty good spots.

I put the 5th gen console in and I want to make a gauge pod for my gauges. I sort of went crazy buying them.lol:catfight:

I made a glove box and mounted my Holley dominator on top of it. And the fuse panel inside it.

I just checked the pictures, thanks it looks good.

Here's mine , 67 camaro, vintage air , its tight but easily do able.

https://uploads.tapatalk-cdn.com/201...222a2b44f7.jpg

That's the way I'm leaning towards mounting my ECU and panel. The 67 has a taller glove box door than a 69 so my ECU will be covered at the top but once its in it will be good. Thanks!

Jeff (JWCARGUY) mounted his where the firewall meets the trans tunnel and it's covered by his 5th gen console. Very easy to get to if need be. Might be worth a PM to get a few more details on that and how he setup his console with the gauges.

https://photos.smugmug.com/photos/i-...-dP8KfDk-L.jpg

:captain:

Thanks Curtis, I can add that to asking if he posted the build of his gauge pod. Thanks for suggesting it.