Corvette master cylinder/ booster
 

Does anyone know the part numbers for the corvette master and brake booster Mark Stielow used in his builds from Amazon?

Are you talking about the one with the plastic reservoir?

Yes. I tried looking in Marks threads but couldn't find them.

IIRC, it's for C6 Corvette.

Here is the S10 mc with the drivers side outlets. Same one that DSE used to use.

Yep, that's the one to use, works well w tuff stuff booster 2229NC, rod kit 4750, and DSE booster bracket 050302.

https://www.summitracing.com/parts/tff-2229nc

https://www.summitracing.com/parts/tff-4750

https://www.summitracing.com/parts/dsr-050302/overview/

I wonder if that would work wih a 4th gen booster

Sorry for the double post, does anyone know if it's safe to use 3/16 rather than 1/4 brake lines directly off of this master cyl?

Many people use all 3/16 lines.

I used the exact cylinder from DSE (shown above) and 3/16” lines everywhere.
Works fantastic
Just get the tube nut for 3/16” to thread directly into large port from classic tube company
By the way, I am running hydraboost