Baer Racing 3-Link
 

Back in the day, Baer racing had a fox body equipped with a 3-link that won the World Challenge series back in 1993.

Supposedly, there was a prototype made for production.

From my understand, this was before Baer Racing was a solely a brake manufacturer




Would anyone have information, pics, or anything on this setup?

If anyone is interested, I was able to obtain photos from a magazine article on the Baer fox body.

https://farm5.staticflickr.com/4682/...e10bb40a_b.jpg

https://farm5.staticflickr.com/4529/...e98927e4_b.jpg

https://farm5.staticflickr.com/4633/...f1f65026_b.jpg

https://farm5.staticflickr.com/4546/...e206397c_b.jpg

https://farm5.staticflickr.com/4556/...85c51b22_b.jpg

Look to the Factory 5 offset 3 link.

Thanks for posting, neat to see how it was done a few decades ago.

On the 3 link deal, I’ve been reading about guys installing a PB, upgrading the lowers and removing an upper link...not sure what to think about that. 🧐

Similar, its just an offset 3-link.

That's refereed to the poor mans 3 link. Pretty common for people who added a panhard bar and not a torque arm. Frees up the rear end some.