Lateral-g Forums

Lateral-g Forums (https://www.lateral-g.net/forums/index.php)
-   Parts for Sale (https://www.lateral-g.net/forums/forumdisplay.php?f=18)
-   -   Forgeline GA3R (18x13/18x9.5) and XXR 557 (18x10 and 18x8.5") (https://www.lateral-g.net/forums/showthread.php?t=55562)

traut811 10-05-2017 06:02 PM

Forgeline GA3R (18x13/18x9.5) and XXR 557 (18x10 and 18x8.5")
 
5 Attachment(s)
Item Location (City/State):Bloomsdale MO

Price: $2000, $900

Description:
I have a couple sets of tires and wheels laying around and dont know when I'll get to them. I'm moving soon, and they're one more thing to find a spot for in the new shop.

The GA3R Forgelines are 18x9.5 front and 18x13 rears. Rears have Hoosier R6 345/35r18s mounted up (used, but not much). They have some nicks and scratches as seen, but should refinish nice. Fronts were sent back to Forgeline to get new inner wheels put on (to narrow them to 9.5") and centers were re-powdercoated satin black. Fronts still in the box. 5x5 lug pattern, was going to use them on my '68 c10. $2000 for all.

The bronze and black set are XXR 557s. New, never been mounted up. Rears 18x10" with BFG G-Force T/A (315/30r18)(1 barely used, 1 new). Fronts are 18x8.5" with new Michelin Pilot SuperSport (255/35r18). The setup is around $1800 new, and again has never been mounted up. Dual lug pattern, 5x100 and 5x114.3, so Ford and a lot of imports. $900

Located in Bloomsdale MO, a little less than an hour south of St. Louis. Would prefer pick up. I can get any measurements or pictures if needed. Thanks in advance

70 tt rustang 10-05-2017 06:12 PM

The xxr wheels what were the offsets made for?

traut811 10-05-2017 06:14 PM

Quote:

Originally Posted by 70 tt rustang (Post 666859)
The xxr wheels what were the offsets made for?

I will measure and let you know.

tpichevy 10-05-2017 11:51 PM

Backspacing on GA3R? I have a truck id like to stuff them under but 18x13...dang! How much is it to have them rehooped?

traut811 10-06-2017 05:41 AM

Quote:

Originally Posted by tpichevy (Post 666869)
Backspacing on GA3R? I have a truck id like to stuff them under but 18x13...dang! How much is it to have them rehooped?

If I remember right, 9.625"BS. Let me find out. I think it was 700 for them to refinish and two new inners but don't quote me on that. They should have inners listed on your site, you child swap them out yourself.

Depending on what truck you're putting them under, should be no problem to run them ;). Minor wheel housing modification though of course haha.

traut811 10-06-2017 05:17 PM

If I measured right, backspace is as follows
Rear XXRs Et19 (6" BS)
Front XXRs Et35 (5 7/8" BS)

Rear Forgelines 9.25"BS
Front Forgelines 5.25"BS

232_ray 10-06-2017 07:27 PM

Damn it!!! If either set was a 4x4.75 I'd get it. Like always bad luck for me. Good luck with sale

70 tt rustang 10-06-2017 07:31 PM

Ok thanks

windycitychev 10-11-2017 06:47 AM

PM sent

traut811 10-16-2017 03:05 PM

XXRs are pending sale.
$1800 on the Forgelines if anyone is interested


All times are GMT -7. The time now is 01:48 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2026, vBulletin Solutions Inc.
Copyright Lateral-g.net