Lateral-g Forums

Lateral-g Forums (https://www.lateral-g.net/forums/index.php)
-   Transmission and Rear End (https://www.lateral-g.net/forums/forumdisplay.php?f=39)
-   -   Clutch / Flywheel options (https://www.lateral-g.net/forums/showthread.php?t=55916)

AB69Z 12-12-2017 05:54 AM
Clutch / Flywheel options
 
1969 Camaro with LS7 (warmed over to make 650 @ the crank) and T56 Magnum.
Do I stay with the GM Corvette setup or go to something different like the Fridenza flywheel ?
I should say the car will be mostly street driven.
I'm running a QuickTime bell housing

andrewb70 12-12-2017 04:45 PM
Quote:
Originally Posted by AB69Z (Post 670151)
1969 Camaro with LS7 (warmed over to make 650 @ the crank) and T56 Magnum.
Do I stay with the GM Corvette setup or go to something different like the Fridenza flywheel ?
I should say the car will be mostly street driven.
I'm running a QuickTime bell housing
Is the clutch slipping?

Andrew

AB69Z 12-12-2017 07:42 PM
No.
I have the current setup behind an LS3 that has not been run yet. I'm just trying to see if it makes sense upgrading it when I install the new LS7

andrewb70 12-13-2017 07:27 AM
So what clutch is in it now? Stock LS3?

Andrew

AB69Z 12-18-2017 06:34 PM
Quote:
Originally Posted by AB69Z (Post 670189)
No.
I have the current setup behind an LS3 that has not been run yet. I'm just trying to see if it makes sense upgrading it when I install the new LS7
I decided to upgrade to the McLeod RST twin disk.


All times are GMT -7. The time now is 08:20 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Copyright Lateral-g.net