Lateral-g Forums - LSx Engine Wire Routing

Lateral-g Forums (https://www.lateral-g.net/forums/index.php)

- Interior and Electrical (https://www.lateral-g.net/forums/forumdisplay.php?f=40)

- - LSx Engine Wire Routing (https://www.lateral-g.net/forums/showthread.php?t=55945)

bullittcustoms

12-18-2017 06:22 PM

LSx Engine Wire Routing

Hey Guys, Where is everyone going through the firewall on the engine and pedal harness? And what about the seal? I have the GM controller, so the fuse block is pretty big. Was planning on putting it behind the ash tray, but where on the computer is good? Just looking for options.... TIA!

Derek

Nova939

12-21-2017 10:38 PM

I made a hole right behind passenger head, just above the factory ribs in the firewall. I can shoot you a pic if you give me an email. I have the gm harness as well and it worked out perfect. I ended up finding a grommet in the junkyard from a Toyota from the door jamb harness, it was exactly 1.5 inch which was exactly the size hole I made in the firewall. I cut and taped it into the harness, worked out great.

randy

12-22-2017 09:56 PM

Speertech gromet more drivers side head behind the motor which keeps it away from the vintage air unit

bullittcustoms

12-31-2017 01:07 PM

Quote:

Originally Posted by Nova939 (Post 670628)

Man a pic would be awesome!! [email protected]

Thanks!!

simbad's68

01-01-2018 07:59 PM

1 Attachment(s)

Here's a pic of my GMPP LSA harness running through the firewall.

bullittcustoms

01-02-2018 01:06 PM

Quote:

Originally Posted by simbad's68 (Post 671083)

Here's a pic of my GMPP LSA harness running through the firewall.

Man that looks clean!! What size grommet is that and where did you get it?

All times are GMT -5. The time now is 07:00 PM.