LSA Accelerator Pedal Assembly
 

Quick question regarding the correct accelerator pedal to use on my LSA/70 Camaro build. A little background: I have a complete BP automotive wiring harness for my LSA swap (thanks Tom!). The harness was originally set up for a LSA + 4l60e trans, I have decided to run a T-56 manual trans. So I know I need to have the wiring converted for the manual trans, which is no big deal. Doing some research, GM had two different Accelerator pedals for the 2009 CTS-V (manual vs Auto)...not sure what the difference would be?? I've read that a C6 Corvette pedal would work??

Looking for input on what pedal will be compatible with my harness...and be the cleanest install in a 2nd gen Camaro??

As long as I am looking for input....Has anyone run into issues with the Crank Pulley on an LSA engine having clearance issues with a DSE sub-frame (2nd gen Camaro)??


Thanks in advance....

I would contact harness maker about the pedal assy I know you can buy them for ZL1 but they have some bling trim added to them now as far as 4l60 or a T56 neither will work long for that power level the LSA uses a dual disc clutch the will fit in the TR6060 bell housing that opens a whole new can of worms - the shifter is external and mounted back far so it will all need some modifying
I was looking at LSA TR6060 in my 69 bird (which I already owned) I decided to build a ZL1 and keel my LS6 T56 in my bird. I'm happy I did it this way
hope this helps out

C6 pedal will work. I also like the 2009 Impala SS pedal, and it will work as well.

Andrew