Ididit 3 bolt quick release
 

Does anyone make a hub/quick release that would attach my ford racing/Sparco 3 bolt steering wheel to an Ididit column. I currently have a grant 3 bolt quick release on it but the problem is all the insides of the column are still visible. Did this years ago and was all I could come up with. Wasn’t sure if someone’s come out with something recently?

I have the same setup -a Grant 3 bolt adapter on to an Ididit column. And yeah, a lot of column guts exposed. My setup is over 15 years old, and a lot of products have come on the market since then but I haven't tried anything. I've thought about epoxying a cover onto theback of the QR but everything I can think of seems like it would make it hard to release, and when I tighten the retaining bolt down there is no "slack" even for a 030 thick cover.

So, I live with it, its sort of a race car anyway Have you asked Ididit for a suggestion ? Woodward makes some nice releases but I think they are oriented towards their columns. I researched it a tiny bit but didn't feellike spending $200 for another qr system only to find it didn't work. Good luck and postbacki fyou find anything promising.

Not 3 bolt but I used NRG quick release on my 67 cougar. It hides all the wires.

https://i.imgur.com/byb1BmA.jpg

then maybe use this to bolt your steering wheel to.