F/X body Speedtech UCA(high clearance)/LCA.
 

Item Location (City/State): Birmingham, AL

Price: $900 shipped within CONUS + paypal fees. Will split up if there is interest. Upper: $450, Lower: $500

Description: Speedtech High Clearance Upper Control Arms (#10210) and Lower Control Arms (#10020).

I mocked these up on my build but changed directions as my never ending project evolved a bit. I won't be using these after all. The are like new. I'll get some pics up of them over next few days. Just gotta pull the blue tape off first :D.

BTW, the high clearance uppers should ONLY be used with tall spindles if using an OEM subframe. That's why I picked them up to begin with. The non-high clearance arms were at - what I thought - was an extreme angle whereas this flat design looked much better.

Thanks,
John

Sorry for delay getting pics. Didn't think about the holidays messing me up.

I also found a set of speedtech tie rod sleeves that I won't be using that I'll include in the deal. Note the sleeves are their earlier version that are steel w/black powder coat.

Lowering price to $925

Thanks!

Bump.

TTT. I'll split these up as well if there's interest.

Both upper and lowers are for 68-74 Nova Correct?
I couldn't find that UCA part number and the one listed on their site doesn't mention needing Tall spindles, even from the road assault pckg. Also, would you be including the grade 8 hardware or possibly the coil spring isolators?

Both upper and lowers are for 68-74 Nova Correct?
-> Yes, these fit 3rd gen Novas (X-body), 1st gen Camaro/Firebird (F-body). Note the high clearance uppers should only be used with tall spindles as I mentioned and was told by Blake at Speedtech when he sold me these.

I couldn't find that UCA part number and the one listed on their site doesn't mention needing Tall spindles, even from the road assault pckg.
-> I don't believe they list these separate from the pro-touring subframe as that is what they were originally designed for. They are available from Jegs, et al online if you google the part number.

Also, would you be including the grade 8 hardware or possibly the coil spring isolators?
->Yes, hardware pictured is included. The lowers didn't come with spring isolators. Those are an option I believe and/or available separately.

Thanks,
John

Do you still have these?

Yes, sadly I still do :-)

Make me a great deal and I'll drive down and pick them up, I'm in Huntsville

Drive down? Heck I'll bring them too you lol. I work in Huntsvegas a good bit.