1967 Camaro Build - Houston, Texas
 

Finally getting around to making a build thread. After reading many of y'all's builds, getting inspiration and ideas to help me along the way. I figured it's time to share mine...

Project started back in May 2015 when I purchased the camaro and the tear down started shortly after. My nephew helping my brother and I

It was in rough shape but I was in love. Pretty complete - so I thought- running and driving with a sbc/th350. Already had new sheet metal on the front end

November 2015- Started ordering parts, still tearing down and getting my plan together

Ridetech Level 2 kit front and rear

99-02 camaro rear disc brakes & Tobin @ KORE3 set me up with the rest of the brake parts

Detroit Speed goodies - smooth firewall plate and mini tubs

December 2015- Camaro loaded up and heading to the body shop. After sandblasting, turns out she was in much worse condition than I expected...

March 2016- Ordered all the Goodmark sheet metal that was needed

From March through June 2016 the sheet metal was getting replaced

DSE firewall insert

June 2016- Got the stock subframe fully welded along the seams and powder coated satin black. Installed the Ridetech front end and Ridetech sway bar. Bolted back to the camaro with new energy suspension body mounts. New fast ratio steering box from Pro Touring Texas. Kore3 caliper brackets. New Moog steering components at this time as well. Firewall sprayed satin black

July 2016- After searching Craigslist day and night for months for parts, I found my wheels. Forgeline WC3 18x8 front & 18x10 rear a guy was selling off his '69 camaro

Front brakes are 99-02 camaro

August 2016- Built a 10x12 shed for lawn equip and storage to have more room in the garage

July - October 2016- Car in primer and starting to look more like a car again! Rear fender lips rolled and whole under side of the car is sprayed in "bedliner"

Ridetech gas cap. More Craigslist shopping found a 99-02 Camaro T56