Lateral-g Forums

Lateral-g Forums (https://www.lateral-g.net/forums/index.php)
-   Shop & Equipment (https://www.lateral-g.net/forums/forumdisplay.php?f=56)
-   -   *NEW* 1 7/8" O.D. ICENGINEWORKS header modeling blocks (https://www.lateral-g.net/forums/showthread.php?t=56738)

Trick-Tools.com 07-31-2018 09:18 AM

*NEW* 1 7/8" O.D. ICENGINEWORKS header modeling blocks
 
*NEW* 1 7/8" O.D. ICENGINEWORKS header modeling blocks.

IN STOCK and READY TO SHIP

Available Now on our website at https://www.trick-tools.com/Icengineworks-Store-867

Dramatically simplify header and turbo manifold design and fabrication with these modeling blocks from Icengineworks! These blocks simply snap together to form header primaries that can then be duplicated by cutting and welding commonly available prebent U-bends and J-bends.
Included with each kit are both straight and curved blocks in a variety of radii. Each block represents a 1 inch arc length of tubing. Blocks of different sizes can also be connected to simulate stepped headers. Each block is molded with a series of markings and index points to make the transition to metal as easy as possible.

https://photos.smugmug.com/Pictures/...75basic-X3.jpg
https://photos.smugmug.com/Pictures/...1875pro-X3.jpg
https://photos.smugmug.com/Pictures/...5system-X3.jpg
https://photos.smugmug.com/Pictures/...ystem_1-X3.jpg
https://photos.smugmug.com/Pictures/...system_2-L.jpg
https://photos.smugmug.com/Pictures/...1875ba_1-M.jpg


All times are GMT -5. The time now is 02:07 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Copyright Lateral-g.net