![]() |
stainlessworks exhaust questions
I just purchased there 3 inch stainless dual system with the crossover and chambered mufflers. They dont supply hangers, can you guys make a suggestion on what to use. Im thinking the hangers will grab the mufflers on the output side(this is a 67 camaro DSE mini tubbed car/3 inch drop leafs/narrowed gas tank). I know the tails probably won fit, if anyone has suggestion on how to modify the tails to fit this car Im all ears.
Thanks Rich |
Look at some other cars on the board, it looks like the tails are cut and rewelded,
your only moving the springs inboard, maybe the stock placed pipes will workout, I have my springs(same DSE minitub) and rear installed, I might put a tail up in there for fitment, I was looking at some stainless hangers from Summit, maybe Burns stainless has hangers too, worth checking into, |
All times are GMT -7. The time now is 05:10 PM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Copyright Lateral-g.net