TR6060 MG9 transmission mount and Crossmember
 

Hey folks - I’ve been searching high and low for some possible combinations to work with a Detroit Speed subframe. Seems no one makes a kit that works with confidence. The MG9 TR6060 (2015) mount bolts up to the side of the transmission. Does anyone know of a combination that works well with the Detroit subframe? I have the Detroit engine mounts with standard setback.

Maybe I'm misunderstanding the question. Are you looking for a crossmember that works with the DSE frame for a TR6060?

I dont know specifically for the 6060, but my T56 Magnum works well on the hooker blackheart crossmember in my DSE frame.

PART# 12626HKR

Can see it a bit in this pic (old pic so can get more recent if you'd like).
https://i.imgur.com/vnUHm6x.jpg?1

Thank you for the reply but the TR6060 is longer and the mount actually attaches to the sides. This has become the issue. I wish I knew for sure that I could use this cross member since I have the headers . I may have to purchase it and do some fabbing. I thought for sure someone would of solved this issue by now.

Is something like this an option?
http://www.brphotrods.com/products/T...etc/index.html

Hmm now I am confused - I did order the CNC spacer from these guys but when I received the transmission I realized the bracket attached to the two sides? Maybe I was sold a standard TR6060 transmission not the MG9? I asked and made sure they said it was a MG9


Sent from my iPhone using Tapatalk

To be fair i'm not familiar with the differences. But i bet you can find something.

Hey Will - I figured it all out. The motor and transmission came from Australia so it’s actually a Holden LSA 6.2. Basically everything is the same as the ZL1 LSA including the hood. I called TREMEC and they were able to confirm the transmission cross referenced a MG9 with the same guts and gears. I do have to fabricate something on the crossmember. I went with the hooker blackheart that fits my DS subframe and I will just have to get crafty with my welder .


Sent from my iPhone using Tapatalk

Do all 6060's mount from the side?

Here are the 2 mounts I have found showing the difference. What is weird, I have a LSA and 6060 out of a 14 zl1 and I haven't taken the crossmember off yet but I swear it doesnt look like the mg9 on the right

Thank you ! Yep very odd. I ended up buying the mount cut it apart and made my own! Much better than the one I bought !


Sent from my iPhone using Tapatalk