Lateral-g Forums - Which tilton?

Lateral-g Forums (https://www.lateral-g.net/forums/index.php)

- Transmission and Rear End (https://www.lateral-g.net/forums/forumdisplay.php?f=39)

- - Which tilton? (https://www.lateral-g.net/forums/showthread.php?t=57643)

paulk68

05-24-2019 10:23 AM

Which tilton?

Going to use the Detroit speed tilton clutch master cylinder bracket. Just need to decide between the Tilton 75-750U or 76-750.any recommendations? Also is 3/4 bore good for LS7 clutch?

andre68

05-24-2019 02:50 PM

hopefully someone can chime in who runs a similar setup, but if not.....I would fb message tilton directly with a question this specific. They're pretty responsive on fb and helped me choose the right pedal set/parts for my car.

dontlifttoshift

05-25-2019 08:44 AM

Which throw out bearing are you using? I like a 3/4" MC with the F body throw out and an LS7 clutch.

paulk68

05-27-2019 04:54 AM

Quote:

Originally Posted by dontlifttoshift (Post 692951)

Which throw out bearing are you using? I like a 3/4" MC with the F body throw out and an LS7 clutch.

Thank you! I have not purchased the throw out yet. do you happen to have a part number for the F body one? thanks

gnx7	05-27-2019 01:47 PM

In my LSx RX-7 swaps we use a 7/8" bore MC. In most applications I just run the LUK '98-02 factory replacement slave. LUK LSC265B $45

All times are GMT -5. The time now is 02:22 PM.