Lateral-g Forums - TMI one piece headliner

Page 1 of 2

Show 40 post(s) from this thread on one page

Lateral-g Forums (https://www.lateral-g.net/forums/index.php)

- Interior and Electrical (https://www.lateral-g.net/forums/forumdisplay.php?f=40)

- - TMI one piece headliner (https://www.lateral-g.net/forums/showthread.php?t=58331)

RdHuggr68

02-29-2020 07:55 AM

TMI one piece headliner

I am rebuilding my 68 Camaro and have a Detroit Speed 4-point rollbar. I am looking at the one piece TMI headliner and was wondering if it can be installed over the rollbar.
Thanks

redfire69

03-05-2020 07:38 AM

I believe it can be since it's installed from the side. I would recommend checking with Waylon from TMI, [email protected]. If it's been done he could tell you.

install instructions: https://static.summitracing.com/glob...p-12002229.pdf

jamminj007

03-09-2020 06:42 PM

Quote:

Originally Posted by RdHuggr68 (Post 701126)

I am rebuilding my 68 Camaro and have a Detroit Speed 4-point rollbar. I am looking at the one piece TMI headliner and was wondering if it can be installed over the rollbar.
Thanks

Most definitely. I did mine, and my roof had a layer of dynamat on it. Like stated earlier, goes in through the side then spin or rotate into place.

RdHuggr68

03-09-2020 09:07 PM

Quote:

Originally Posted by jamminj007 (Post 701386)

Most definitely. I did mine, and my roof had a layer of dynamat on it. Like stated earlier, goes in through the side then spin or rotate into place.

Thanks for the info, do you have any pictures to share?

jamminj007

03-10-2020 11:31 AM

Quote:

Originally Posted by RdHuggr68 (Post 701394)

Thanks for the info, do you have any pictures to share?

I will take some tomorrow.

minendrews68

03-13-2020 03:49 PM

Did these pictures ever get posted anywhere? I'd like to see them too.

RdHuggr68

03-13-2020 07:52 PM

Quote:

Originally Posted by minendrews68 (Post 701509)

Did these pictures ever get posted anywhere? I'd like to see them too.

I haven't seen anything yet.

jamminj007

03-22-2020 01:36 PM

I apologize, I haven't been able to go to the Upholestry shop. With this COVID epidemic and me working in the hospital system I have been busy. I will try to get over there this Wednesday.
Thanks
Jonathan

jamminj007

04-02-2020 04:25 PM

Roll cage

4 Attachment(s)

Quote:

Originally Posted by RdHuggr68 (Post 701516)

I haven't seen anything yet.

Hope this helps

RdHuggr68

04-02-2020 08:48 PM

Quote:

Originally Posted by jamminj007 (Post 702085)

Hope this helps

Thanks for the pictures Jonathan, looks great. Did you install it from the side?

All times are GMT -5. The time now is 05:24 AM.

Page 1 of 2

Show 40 post(s) from this thread on one page