![]() |
Need help Socal
Hello, Im trying to start my LS9 but no luck. Power at the coils, injectors, had the ECM Vats turned off, fuel pressure at the rails but just cranks. I have two grounds from the engine to the frame and I just ordered two more to be safe. Anyone ever come to someones house to help get started? Willing to pay.
Thanks, Stacy |
Do you have an rpm signal when cranking? If you do I'd make sure the VATS is properly removed. If not, then start checking the crank/cam sensors and wiring.
|
Quote:
Where can I check for a RPM signal at? |
The easiest way to see what’s going on is to find someone with HPTuners to come over and plug up while your cranking. I had same issue as you once with a build and found my MAP sensor connector was mis-wired. I would have NEVER found that without the software. Bottom line is...it’s always something simple.
|
Quote:
|
All times are GMT -5. The time now is 08:50 PM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Copyright Lateral-g.net