Lateral-g Forums - Backspacing for a square setup

Lateral-g Forums (https://www.lateral-g.net/forums/index.php)

- Wheels and Tires (https://www.lateral-g.net/forums/forumdisplay.php?f=53)

- - Backspacing for a square setup (https://www.lateral-g.net/forums/showthread.php?t=58751)

spazegun2213

10-13-2020 12:02 PM

Backspacing for a square setup

Alright guys, I'm doing things a bit backwards and letting my wheels define rear axle width.

My have a '71 Fbody subframe from Speedtech, and I'm using their rear TA setup with DSE mini tubs.

So my question to you all is if I wanted to run a square 315/35/18 setup what are the backspacing numbers I should be looking at?

Swain

10-13-2020 11:02 PM

You should measure the front space you have from the mounting surface to the fender. Is the rear end shortened ?
You can email me at [email protected]

spazegun2213

10-15-2020 11:11 AM

Quote:

Originally Posted by Swain (Post 707350)

You should measure the front space you have from the mounting surface to the fender. Is the rear end shortened ?
You can email me at [email protected]

I don't have any of the front bodywork mounted yet, sadly. Which is why I was was asking if anyone had this setup and could toss out a number. I'm not concerned for a perfect fit just yet, more looking for a ballpark.

All times are GMT -5. The time now is 12:15 PM.