PowerStop C6-Z06 Trackday Brake package
 

This is going on my '78 Trans Am. I have been running a C5 Z06 brake package.

https://uniim1.shutterfly.com/ng/ser...202143/enhance

https://uniim1.shutterfly.com/ng/ser...202138/enhance

https://uniim1.shutterfly.com/ng/ser...202135/enhance

https://uniim1.shutterfly.com/ng/ser...202126/enhance

Well...that should make a noticeable difference in braking force!

Looks like your helper approves as well.

Someone trying to win that 25k?

Any changes to the master cylinder as well or just the brakes? Just curious, don't know of a reason it would be needed...

Greater piston area on the new calipers?

I'm already running a 1" bore master, so I think that's going to work out. I don't know, there may be something I need to do with the rears to control bias.

Yes, like 40% more. The thing that I think I'll notice most is the heat dissipation. The brakes got very hot up a PPIR on the roval after a few laps of hard running.

https://uniim1.shutterfly.com/ng/ser...996700/enhance

https://uniim1.shutterfly.com/ng/ser...996702/enhance

https://uniim1.shutterfly.com/ng/ser...996700/enhance

https://uniim1.shutterfly.com/ng/ser...996710/enhance

https://uniim1.shutterfly.com/ng/ser...996712/enhance

https://uniim1.shutterfly.com/ng/ser...996712/enhance

https://uniim1.shutterfly.com/ng/ser...996698/enhance

Are you running power or manual brakes? I am thinking about doing the c6 z06 brakes on my 73 Camaro and I'm trying to figure out which mc I need to go with.

If you don't already have the brackets to mount them, I would give a shout to Tobin Knighton at Kore3. Fantastic products and great tech assistance to help you get the best/correct sized master cylinder/booster/etc for the combination.