Lateral-g Forums

Lateral-g Forums (https://www.lateral-g.net/forums/index.php)
-   EFI and Forced Induction (https://www.lateral-g.net/forums/forumdisplay.php?f=47)
-   -   LT4 crate engine no start (https://www.lateral-g.net/forums/showthread.php?t=59005)

vet57air 03-11-2021 04:39 PM

LT4 crate engine no start
 
Tried to start my crate LT4.... not a sputter. Fuel pump ramps up and I have fuel at the engine. ECU gives me a PO 00006 code, from which is suppose to be for a fuel shut off valve. Can see nor smell fuel on plugs. On the back of the engine I know of two plugs one on each side for the injectors and one other on the drivers side that looks like its for the intake (maybe pressure)? Anyone know where this valve is located? Is there a plug for it?

vet57air 03-11-2021 05:26 PM

Quote:

Originally Posted by vet57air (Post 711100)
Tried to start my crate LT4.... not a sputter. Fuel pump ramps up and I have fuel at the engine. ECU gives me a PO 00006 code, from which is suppose to be for a fuel shut off valve. Can see nor smell fuel on plugs. On the back of the engine I know of two plugs one on each side for the injectors and one other on the drivers side that looks like its for the intake (maybe pressure)? Anyone know where this valve is located? Is there a plug for it?


I see in the GM manual it makes mention of a "soak and idle" which is to connect the battery for 8 hours before starting. "Turning on the ignition for any length of time may cause you to have to soak an additional 8 hours". I didn't do the soak. Could that be the issue?

randy 03-11-2021 06:14 PM

I kept on resetting the check engine light and it eventually started

vet57air 03-11-2021 06:36 PM

Quote:

Originally Posted by randy (Post 711109)
I kept on resetting the check engine light and it eventually started

Thanks for that. I will give it another try tomorrow. Do you know what code came up in your case?

vet57air 03-12-2021 09:49 AM

Got it running this morning. I had cleared the active code PO 00006 yesterday.
So I imagine it was that or it needed the "8 hour soak and idle"


All times are GMT -7. The time now is 07:06 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2026, vBulletin Solutions Inc.
Copyright Lateral-g.net