torque spec for budniks
 

Ive never tightened a wheel with a torque wrench, always hand tightened. Only use the impact gun for loosening. Any one have any idea what the torque spec would be on these alluminum wheels using 1/2 studs in the rear and 7/16 up front?

Thanks Rich

100ilbs, tighten in a star pattern

Here are our recommended specifications using a calibrated torque wrench.

7/16 75ft. lbs.
12x1.5 80ft. lbs.
1/2 85ft. lbs.

please remember that stud engagement into the lug nut must at least be equal to the diameter of the stud.

thank you,
Jason

Thanks Guys