Lateral-g Forums - Mandrel bent oval tubing?

Lateral-g Forums (https://www.lateral-g.net/forums/index.php)

- EFI and Forced Induction (https://www.lateral-g.net/forums/forumdisplay.php?f=47)

- - Mandrel bent oval tubing? (https://www.lateral-g.net/forums/showthread.php?t=8419)

2kx2	03-01-2007 12:29 PM

Mandrel bent oval tubing?

I am looking for someone that can supply or knows how to get oval tubing that is mandrel bent. I know that Dr. Gas can do it by bending it on the edge.

I am wanting the tubing to be bent on the flat side. Basically it would come out of the TB and bend down, go straight and then bend again into the intercooler.

Any suggestions and help is greatly appreciated.

race-rodz

03-01-2007 08:28 PM

spin tech

californiacuda

03-01-2007 08:38 PM

Burnes stainless

TravisB

03-01-2007 09:47 PM

i second spintech

chicane

03-05-2007 07:23 PM

Dr. Gas = Spintech...

Burns will edge bend but not flat bend.

Impala TT

03-06-2007 01:54 PM

Check out Woolf Aircraft. That's who I've got a lot of tubing from. http://woolfaircraft.com/

Garage Dog 65

03-12-2007 04:16 PM

1 Attachment(s)

If it's thin gauge - you can do it in a pullmax.

All times are GMT -5. The time now is 12:15 AM.