Thumbs up for ATS
 

Sent this along to ATS but would also like to post here.

Just wanted to send off an email thanking you for the ATS spindles I received yesterday on order #102372. This will make the 3rd product I have received from ATS and I am amazed at the level of quality you produce. I am an aerospace machinist and have worked at the family business for over 25 years. The products you have been able to engineer and offer are top level and I could not be happier.

Last night I put the spindles on my 73 Nova SS and they instantly solved every problem I was having with the tire fitment and suspension geometry. I paired them with the short Z28 tie rod arms and am running an 18 inch wheel with the DSE coilover kit and tubular arms. The only thing I could point out is that if the design allows would be to open up the diameter of the counterbore about 1/32 on the bolt holes for attaching the tie rod arms. A thin wall socket just lightly drags on the housing.

ATS will be my first stop every time when I need the next part for the car.

Thanks Again.


Jason Reed
Sheetmetal Engineering Inc.
1780 N. Voyager Ave.
Simi Valley Ca. 93063
P 1-805-306-0390
F 1-805-306-0389
www.sheetmetaleng.com

Yea, They rock.