Pinion Angle ?
 

I did the whole mini tub DSE 3" drop leaf spring install. Was wondering what you guys think of these numbers? Ive had the car out and dont have any vibration on the highway, but Ive always questioned this in my mind. Tailshaft of the trans is 2.5 deg pointing down and the yoke on the rear is at 0 deg. Is this ok?

I asked this question myself. I got some great answers from some people on this board. In a nut shell, the angle of the tailshaft and the angle of the rearend should be within a half of a degree of each other. Here is a super cool site that explains it all....

http://www.vibratesoftware.com/html_...Specifications

Hope that helps.

Darren