Lateral-g Forums

Lateral-g Forums (https://www.lateral-g.net/forums/index.php)
-   Transmission and Rear End (https://www.lateral-g.net/forums/forumdisplay.php?f=39)
-   -   Torque setting on dual mass flywheel for LT1 (https://www.lateral-g.net/forums/showthread.php?t=914)

Musclerodz 04-29-2005 03:34 PM
Torque setting on dual mass flywheel for LT1
 
I am just about ready to mount the flywheel to the LT-1. Does anyone know the required torque setting? Besides resurfacing, does anything else need to be done to the dual mass flywheel? I have never messed with one of these flywheels before.

Mike

93Polo 05-02-2005 10:06 AM
Quote:
Originally Posted by Musclerodz
I am just about ready to mount the flywheel to the LT-1. Does anyone know the required torque setting? Besides resurfacing, does anything else need to be done to the dual mass flywheel? I have never messed with one of these flywheels before.

Mike
Are you running a ZF trans?

Musclerodz 05-02-2005 10:49 AM
yes

Mike

93Polo 05-05-2005 07:33 AM
Quote:
Originally Posted by Musclerodz
yes

Mike
I never resurfaced the flywheel on my C4. If the surface does not have hot spots you should be able to bolt it up. Maybe USAZR1 will step in.


All times are GMT -5. The time now is 04:15 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Copyright Lateral-g.net