Lateral-g Forums - Project "Aftermath" 1969 Custom Camaro in a box!!

Lateral-g Forums (https://www.lateral-g.net/forums/index.php)

- Parts for Sale (https://www.lateral-g.net/forums/forumdisplay.php?f=18)

- - Project "Aftermath" 1969 Custom Camaro in a box!! (https://www.lateral-g.net/forums/showthread.php?t=9342)

Project "Aftermath" 1969 Custom Camaro in a box!!

Call me with any question 229-221-4690 or email [email protected]

Here we go!!

-1969 Camaro Coupe, original X-55, 350/3 speed SS car, have title , vin, trim tag, hidden vins, etc. Two big boxes of original bolts, brackets, etc $$23,000

-**Car has no suspension or subframe.

-Sheetmetal replaced-- All panels where stipped of original EDP coating, sprayed with bed liner on inner sides, and all panels are covered with PPG epoxy
-Both full Dynacorn quarters
-Dynacorn tail panel
-Dynacorn roof skin
-Dynacorn roof structure supports
-Goodmark outer fenders
-DSE mini tubs
-Goodmark one piece trunk pan
-Goodmark one piece full floor
-Mike's Custom cars full frame rails
-Goodmark rear filler
-NOS package tray
-Dynacorn full inner and outer Rockers
-dynacorn complete dash assembly
-Dynacorn complete firewall, with both tulip panels
-Goodmark cowl panel
-Goodmark RS front fenders and lowers
-Goodmark? inner front fenders
-Goodmark upper and lower front panels
-GM New RS grill with hardware
-GM and Goodmark parts and hardward for front end and lights
-if it was available it was replaced. this is as new of a car as you can get

-Exterior Accessories, all new in box, most never opened

-Marquez billet side marker lights $55
- Modern Taillights $210

-GP superstore Smoked glass kit $550

-Wheels and Tires $4250
-Intro Id Luxury 307 wheels, 3 piece wheels, with chromed hoops and black poweder coated spokes
-18x8 front
-20x12 rear
-335/30/20 tires new

Drivetrain- $10,200 for motor

-Brand spanking new, built by Dave Diluca 402" LS2, motor is good for 850+ HP, and will make 525+ as is at the rear wheels
-LS2 4.00" block
-Block clearanced for rods
-Hone w/ torque plate
-Line hone
-knock sensor tapping and sensor
-ARP main studs
-Eagle 4.00" 4340 crank
-Lunati Billet 6.125 rods
-Custom pistons/rings/pins
-internally balanced
-Custom Comp cam
-Morel lofters
-JP double chain
-ported oil pump
-valley and front covers
-lifter trays
-rear cover
-AFR 225cc CNC heads
-Cometic gaskets
ARP bolts throughout
-Comp pushrods
-Billet valve covers
-all sensors installed

-**Harrop Engineering Hurricane intake $3800

-ATS oil pan $

-Custom Built 750+ torque T56 from ATS $3450
-Mcleod Street Twin Clutch $1925
-ATS install kit, with firewall bracket and modded GM hydros $450

sorry to see it go, hopefully they will finish it as intended

As of May 6th, 2007 Everything is officially for sale!! If you have posted or PM'd please resend PM with exactly what you want and your offer. This is not a Yard sale so I am not gonna give stuff away!

Please contact me before sending any payment!

Payment by Paypal plus 3% to [email protected]

Or to Chad Fletcher
PO Box 35
Coolidge, GA 31738

how much for this stuff if your parting it out? PM me if you want.
-short/long block?
-rims,tires?
-ATS Stainless Steel Road Race headers
-ATS oil pan
-Custom Built 750+ torque T56 from ATS
-Mcleod Street Twin Clutch
-ATS install kit, with firewall bracket and modded GM hydros
-DSE Stainless narrowed tank with intake Aeromotive pump
-Hydroboost with install kit and lines

Chad:

Please PM me with prices on the following items:

-DSE Billet Hood hinges
-DSE body mounts
-DSE bright driver headlight kit
-DSE RS electric headlight conversion
-GM New RS grill with hardware
-GM and Goodmark parts and hardward for front end and lights

-DSE dash insert

-Brand spanking new, built by Dave Diluca 402" LS2 (Was this Dyno'ed?)

-**Harrop Engineering Hurricane intake
-ATS Stainless Steel Road Race headers
-ATS oil pan

-ATS install kit, with firewall bracket and modded GM hydros

-DSE Stainless narrowed tank with intake Aeromotive pump
==============================================

Thanks, I look forward to hearing from you.

Ty O'Neal

Here we go!!

-1969 Camaro Coupe, original X-55, 350/3 speed SS car, have title , vin, trim tag, hidden vins, etc. Two big boxes of original bolts, brackets, etc $$23,000

-**Car has no suspension or subframe.

-Sheetmetal replaced-- All panels where stipped of original EDP coating, sprayed with bed liner on inner sides, and all panels are covered with PPG epoxy
-Both full Dynacorn quarters
-Dynacorn tail panel
-Dynacorn roof skin
-Dynacorn roof structure supports
-Goodmark outer fenders
-DSE mini tubs
-Goodmark one piece trunk pan
-Goodmark one piece full floor
-Mike's Custom cars full frame rails
-Goodmark rear filler
-NOS package tray
-Dynacorn full inner and outer Rockers
-dynacorn complete dash assembly
-Dynacorn complete firewall, with both tulip panels
-Goodmark cowl panel
-Goodmark RS front fenders and lowers
-Goodmark? inner front fenders
-Goodmark upper and lower front panels
-GM New RS grill with hardware
-GM and Goodmark parts and hardward for front end and lights
-if it was available it was replaced. this is as new of a car as you can get

-Exterior Accessories, all new in box, most never opened

-Marquez billet side marker lights$65
- Modern Taillights $210
- Billet fron turn signals $165
-GP superstore Smoked glass kit $550
-DSE Firewall fill plate SOLD
-DSE core Support close out SOLD
-DSE Subframe connectors SOLD
-DSE Billet Hood hinges $525
-DSE body mounts $80
-DSE Roll cage kit SOLD

-Electrical

-American Autowire Classic update kit SOLD
-American Autowire Sequential tailight kit $290
-Electric Autolife front and rear power window kits, 4 door billet BMW style switches, and Billet wire looms $750
-DSE bright driver headlight kit $125
-DSE RS electric headlight conversion SOLD

-Interior

-Ididit Chrome, floor shift, tilt column SOLD
-DSE dash insert $ 510

-Wheels and Tires $4250
-Intro Id Luxury 307 wheels, 3 piece wheels, with chromed hoops and black poweder coated spokes
-18x8 front
-20x12 rear
-335/30/20 tires new

Drivetrain- $10,200 for motor

-Brand spanking new, built by Dave Diluca 402" LS2, motor is good for 850+ HP, and will make 525+ as is at the rear wheels
-LS2 4.00" block
-Block clearanced for rods
-Hone w/ torque plate
-Line hone
-knock sensor tapping and sensor
-ARP main studs
-Eagle 4.00" 4340 crank
-Lunati Billet 6.125 rods
-Custom pistons/rings/pins
-internally balanced
-Custom Comp cam
-Morel lofters
-JP double chain
-ported oil pump
-valley and front covers
-lifter trays
-rear cover
-AFR 225cc CNC heads
-Cometic gaskets
ARP bolts throughout
-Comp pushrods
-Billet valve covers
-all sensors installed

-**Harrop Engineering Hurricane intake $3800
-ATS Stainless Steel Road Race headers $ 2600
-ATS oil pan $

-Custom Built 750+ torque T56 from ATS $3450
-Mcleod Street Twin Clutch $1925
-ATS install kit, with firewall bracket and modded GM hydros $450
-DSE Stainless narrowed tank with intake Aeromotive pump $1000
-Hydroboost with install kit and lines $625
Edit/Delete Message

Chad i want these..

-DSE Firewall fill plate $45
-DSE core Support close out $350
-DSE Subframe connectors $155
-DSE Roll cage kit $ 600
-Ididit Chrome, floor shift, tilt column $ 515

clear your inbox!