Lateral-g Forums - LS7 Update: Carbon fiber valve covers and front accessory drive

Lateral-g Forums (https://www.lateral-g.net/forums/index.php)

- Project Updates (https://www.lateral-g.net/forums/forumdisplay.php?f=16)

- - LS7 Update: Carbon fiber valve covers and front accessory drive (https://www.lateral-g.net/forums/showthread.php?t=9454)

LS7 Update: Carbon fiber valve covers and front accessory drive

Here's the latest update to the project and a little eye candy... I installed the valve covers from Carbon Fiber Valve Covers.com and the new front accessory drive from Synister Products.

The carbon valve covers not only look incredible, but the engineering behind them is first rate. I was impressed when I put the O-ring seal in the channel in the covers. They fit like they were a factory piece.

The front accessory drive is annodized black and is damn trick. I haven't pressed on the balancer hub yet, but you get the idea. The T-stat housing is billet and annodized black.

I'm pretty stoked how it all came out, but I'll let the pictures speak for themselves.

https://lateral-g.net/g69/project/motor/0091.jpg

https://lateral-g.net/g69/project/motor/0101.jpg

https://lateral-g.net/g69/project/motor/0096.jpg

https://lateral-g.net/g69/project/motor/0082.jpg

https://lateral-g.net/g69/project/motor/0102.jpg

Nice!!!!

_________________
- Dan

Sweet. Looks great Scott :thumbsup:

SWEET!:thumbsup:

P.S where did you get those hoses from?

The dry sump hoses are -12 Earl's Pro-Lite.

Thanks Scott:thumbsup:

Yeeeeeeeaaaaaaahhhhhhh Booooyyy!!!!! very cool!:thumbsup:

Wait a minute...What happened to the custom intake from here: https://lateral-g.net/forums/show...t=7736&page=14