Lateral-g Forums - How do you CORRECTLY square front subframe?

Lateral-g Forums (https://www.lateral-g.net/forums/index.php)

- Chassis and Suspension (https://www.lateral-g.net/forums/forumdisplay.php?f=38)

- - How do you CORRECTLY square front subframe? (https://www.lateral-g.net/forums/showthread.php?t=9598)

MadMaxx

05-19-2007 11:47 AM

How do you CORRECTLY square front subframe?

Hi guys! I know someone can tell me the CORRECT way to square the front factory subframe to the body. I am going to be installing DSE SFC and the quadra link. So can someone please point me in the right direction. I know there has to be factory marks or holes I can measure from or something. How far of a tolerance can there be for it to be out of square if any.

Thanks guys

dhutton

05-19-2007 11:51 AM

Maybe this will help.

http://home.sport.rr.com/cdjrracing/f-bodyframe.htm

joeljet

05-20-2007 09:48 AM

on the 2nd gen theres an alignment hole right next to the forward body bushing. look up at the bolt head. i believe the size is .610

HotRod68Camaro

05-22-2007 01:16 PM

http://www.pro-touring.com/forum/sho...ht=frame+rails

All times are GMT -5. The time now is 05:01 PM.