Hotchkis rear upper adjustible control arm problem question for GM A-Body??
 

I`m in the process of doing the installation when i noticed on the upper control arm specifically the drivers side i had to put a notch in it cause it would not fit due to it hitting the rear end housing,has anyone experienced this problem with their`s on their GM A-Body?


Thanks

Something ain't right, take a picture and post it!

Here are 2 pics,1 is before i notched it.

what size is that rear end? 10 bolt,12 bolt? that may be the problem

Its a `67 Chevelle 12 Bolt rear.


Thanks

I wonder if hotckis sent you a 10 bolt arm,the 12 bolt should be angled were it mounts to the ears of the diff

these are the upper none adjustables for the 67 velle,note the hole location on these
http://i143.photobucket.com/albums/r...hotos/1200.jpg

I dont know dude,maybe i`ll call them tomorrow and see what i can come up with??

Just checked out Hotchkis websight and they list the same part # for 10 and 12 bolt?


Thanks

ok buddy.good luck