Quote:
|
Originally Posted by 67mike
I will do that.
Excellent information everyone, THANK YOU!!
I know its not going to be cheap, but its the only route I can see at this time.
Ive done some research and was disappointed to find out they do not manufacture a oval 90 degree elbow that bends up. For example a 90 degree elbow that would go over the rear axle in oval the horizontal way. They only make 90 degree oval elbows that turn out sideways.
|
You're on the right track. You'll buy some straight pipe and mufflers, obviously. You will also by some 45's and 90's to make tailpipes. Getting around the gas tank is the beyotch. And then get a different type of 45 to make the x-pipe.